7 Ways to Clean Paving

Cleaning your paving does not have to be difficult.

If you are searching for paving slabs cleaning tips and tricks, you have come to the right place. In this post, we present a detailed cleaning guide for paving slabs and describe 7 ways to clean paving slabs.

Pavers are exposed to the elements all year, so dirt naturally builds over time. Grass, leaves, and dust may all produce scars on your pavers over time.

A well-kept clean pavement or driveway will increase the value of your property, whilst an unnoticed and unclean paver will do the reverse. Even the most neglected pavers may be given new life with the appropriate materials and a little elbow grease.

After reading this guide, you will be able to handle the cleaning on your own and will understand how to remove dirt and stains that obscure the appearance of your lovely pavers.

You will be delighted when you see the difference between the before and after appearances at the end of the cleaning.

How to Clean Paving

  1. Regular Cleaning and Upkeep

To maintain a clean appearance, pavement slabs must be cleaned and swept on a regular basis. Every season, do a thorough cleaning. Preventing dirt and grime from being collected over time is the best way.  

One wise piece of advice is to remember to brush your patio, driveway, or walkway on a regular basis, especially during the fall. This should keep crushed leaves from accumulating and resulting in those pesky discoloration streaks in the spring.

Brushing regularly disturbs newly growing weeds and kills them before they have a chance to establish themselves. Regular paver care helps to maintain a clean surface and looks fantastic.

  1. Pressure Washing

Even though pavers are quite sturdy, after all the fun barbecues and weather conditions have taken their toll, they may begin to look a bit unkempt.

Cleaning your pavers properly has more advantages other than simply making them appear nice—it also makes them more lasting and safer.

Pressure washers can be a godsend when it comes to cleaning pavers. Pressure washers use a high-pressure water spray to remove dust, mold, chewing gums, stubborn stains and other build-ups on your pavers.

Pressure washer nozzles can help to change the direction of flow, pressure, the velocity of the water. Because the water is travelling past, it collides with the unclean surface with a lot of kinetic force, pushing dirt and dust away. Since it is just water, it will not harm most hard surfaces.

Some pressure washers provide extra functions. A water pump, a high-pressure hose, and a cleaning attachment can be included with pressure washers. 

Most washers operate in the same manner and perform the same functions, but if you want something with greater cleaning power, you may need to spend a little more to acquire something with higher water pressure.

Pressure washers can clean your pavers thoroughly, but they are not for everyone. Water is used extensively by pressure washers (usually 6-8 liters per minute).

Because the water runs swiftly, a suitable drainage infrastructure may be required; otherwise, flooding in your yard may occur. They can also be rather loud.

Despite the fact that pressure washers are insulated and safe to use, there is always the risk of operating electrically powered equipment near water. There are, however, various ways to clean your pavers without using pressure washers.

  1. Soapy Water or detergent

One of the most effective ways of cleaning pavements is using plain old soap water. Washing up liquid combined with warm water will work wonders to get clean pavers. All you need is dish soap, warm water, a brush, and a bucket.

Begin by combining the washing-up liquid and warm water in a bucket. Then swish the soapy water onto the surface and scrape with a brush to release the dirt. You may also use a power washer, but don’t overdo it or you’ll harm the blocks and slabs.

Repeat with the splashing and scrubbing routine until you’ve covered your whole patio. Finally, clear the dirty water away with a bucket of clean water so that it flows into the drain.

Some homeowners like to use a protective coat of sealant to help prevent stains and protect their natural stone and concrete surfaces after they finish washing their pavement.

  1. Special pavement cleaners

You can use cleaners and stain removers that are specifically designed for the job. There are several cleansers and stain removers that are suitable for cleaning natural stone and concrete surfaces.

For example, this Simple Green cleaner is used with your power washer. It cleans a wide variety of surfaces such as wood, composite, vinyl, metal, fabric, plastic, wicker, concrete, stone, brick and asphalt.

Special purpose cleaning liquids are safe to use on all varieties of natural stone and may be used for both deep cleaning and routine maintenance. You can find cleaning agents that are ideal for removing oil deposits and stains created by trees or flowers from garden slabs, and they will return all forms of natural pavement to their original color.

  1. Cleaning your paving slab with bleaching powder

Bleaching powder is also effective for cleaning the surface which is affected by the algae. There is more possibility for the presence of algae in the paving area. You can remove that all by cleaning the slab by using the Bleaching powder.

You can mix the bleach with water in a five-to-one water-bleach ratio. Apply the mixture to your pavement and scrub any dirt, stain or debris. Make sure you wear gloves and use a brush with a long handle. Do not get the mixture on yourself. Then, leave it for fifteen minutes and rinse.

  1. Cleaning your paving slab with Vinegar solution

A natural method of cleaning your pavement is using vinegar.  vinegar can be used to eliminate stubborn stains and dirt.  make sure you use white vinegar, dark vinegar willy instead stain your paving.

Acid-based cleaning products should be avoided whenever possible.  there is always a danger to yourself when you are using strong cleaning agents.  there is also the possibility that they said will cause damage to the stone in your pavement. Sometimes they do more harm than good.

Be careful with cleaning agents that have hydrochloric acid (or other acids such as Muriatic) listed in their ingredients. Most granites, basalts, porphyry, slates and quartzite seem to be unaffected by acid or acid-based cleaners but proceed with caution and test a small discreet area first.

  1. Weed Killer and Sealant

To keep your pavers clean, you should consider using patio sealants. Sealants help to prevent weathering and are also effective at preserving the color of patio slabs – a good option if you have recently laid dark patio slabs.

A good quality sealant will prevent weeds from settling into the pavement structure.

However, even the very best sealant cannot prevent the build-up of detritus, and if this is allowed to accumulate on top of a surface, the weeds will quite happily take up residence, regardless of the sealant.

Weedkillers have their uses and, when used with care, can be very effective at killing off existing weeds and deterring re-colonization for a period of weeks or even months.

There are also a growing number of so-called “Weed Preventers” which are chemicals that are applied to a paved surface after cleaning. Stopping the weeds before they settle is a good way to make sure there are no weeds on your pavement. These work by killing off any seed or weed that may plant itself in your pavement.